![]() (See PICTURE #2) Care should be taken not to misplace the frame latch button should it drop out of the receiver. Using the same flat-blade screwdriver depress the frame latch button again and remove the frame the rest of the way off the receiver. ![]() About half way back the frame latch button will catch Once the frame is clear of the button you can remove the screwdriver and continue pulling the frame to the rear. (See PICTURE #1) At the same time pull the frame to the rear (new guns may be tight). With the firearm upside down and using a flat-blade screwdriver with a 1/8" width blade depress the frame latch button in the rear bottom portion of the receiver. ![]() Before disassembly the bolt should be in the forward position, firing pin in the fired position and the safety lever in the "FIRE" position.ģ. Confirm once again that the rifle is unloaded by visually checking the chamber. ![]() With the rifle pointing in a safe direction, safely lever in the "SAFE" position, remove the magazine by pushing up on the magazine catch and pulling the magazine out of the rifle.Ģ. Takedown procedures for all Thompson semi-autos are the same.ġ. WARNING: MAKE SURE YOUR THOMPSON RIFLE IS UNLOADED BEFORE STARTING THIS PROCEDURE. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |